Canon Ij Setup PIXMA MX497

Canon Ij Setup PIXMA MX497

Canon Ij Setup PIXMA MX497 Canon Ij Setup PIXMA MX497

Canon Ij Setup PIXMA MX497 – Ordinance’s PIXMA MX495 is a little inkjet multifunction fringe (MFP) went for home workplaces: appropriately, it can print, sweep or duplicate, and send or get faxes. It’s a savvy, conservative gadget with a 20-page programmed report feeder (ADF) incorporated with the scanner top, so you can allow it to sit unbothered to duplicate longer records, or send a multi-page fax. There’s help for USB associations and remote systems administration, however no front-board USB or wired Ethernet port – we wouldn’t really expect either at this price.Despite the shoddy cost and reduced outline, the Canon Ij Setup PIXMA MX497 is sensibly fulfilling. At the point when not being used, the ADF’s info plate can overlap close to keep tidy out. In the base there’s a 100-sheet paper plate that slides out, however can’t be evacuated, and printed pages are spat into a respectable, if adaptable, yield plate above it. While this MFP can’t naturally print on the two sides of a sheet of paper, the driver will enable you to do it manually.To the left of the ADF is a perfect control board with a mono show, however this demonstrated somewhat fastidious being used – we regularly thought that it was included one more advance or affirmation than anticipated. It’s additionally a mission to join the gadget to Canon’s Canon Ij Setup PIXMA MX497 Cloud Link benefit: you have to print a code specifically from the printer which is substantial just for 60 minutes, visit a URL that is difficult to type, enroll, answer an email and make a client name before you can begin – other makers’ reciprocals are less involved.Even when associated by means of USB, this was the slowest printer we’ve tried for some time. It conveyed a first page of content in only 14 seconds, yet could oversee just 8.4 pages for every moment (ppm) more than 25 pages. Shading pages crawled out at an icy 1.6ppm, to some degree because of consistent delays between sheets. We’ve seen facial hair seem more rapidly than this current printer’s 6×4″ photograph prints, every one of which required just about six minutes to finish. Photocopies were moderate, especially in shading where we saw more delays: 10 A4 pages took seven and a half minutes. Cheerfully, check speeds were considerably more focused, with even a 1,200dpi output of a 6×4″ photograph finishing in under a minute.Fortunately there was little to censure about any of our outcomes. Sweeps were vastly improved than normal for a spending gadget, with sharp concentration and extraordinary detail. Photocopies were additionally awesome, and content and designs were both fine on plain paper. Those with sharp eyes may detect a touch of grain in this current printer’s photographs, yet they surely weren’t terrible.

Ink cartridges for the Canon Ij Setup PIXMA MX497 arrive in a decision of two sizes. Utilizing the bigger of these, costs work out at an exceptionally sensible 6.9p for each A4 page of content and designs, in spite of the fact that the dark part of this is a lofty 2.9p. Given its low cost, fit highlights and great outcomes, this is an incredible spending office MFP, however with moderate print velocities and high dark page costs, we’d just prescribe it for light to direct utilize. That is the short review about Canon Ij Setup PIXMA MX497 .

How to excecute Canon Ij Setup PIXMA MX497 ? here are some instructions:

Connecting via Wireless LAN

figure: Connection without using wireless router

  1. The screen shows MenuWireless LAN connection,Wired LAN connection, USB Connection and Do Not Connect
  2. Press/TapWireless LAN connection.
  3. To confirm the choice please Press/Tap Yes.

    Please wait for a couple second to let the setting works, when the success notice appears on the screen, theprinter isready for use.
    Then set up a connection that you need, for example the connection between theprinterand computer, smartphone, or tablet.

Connecting via Wired LAN

figure: Wired connection

  1. The screen shows MenuWireless LAN connection,Wired LAN connection, USB Connection and Do Not Connect
  2. Tap/PressWired LAN connection.
  3. To confirm the choice please Press/Tap YES.When the screen ask to connect the ethernet cable, please connect theprinterto a network device such as a modem or router with an Ethernet cable.
    figure: Connect printer to network device with Ethernet cable
  4. Tap OK to confirm.

    Please wait for a couple second to let the setting works, when the success notice appears on the screen, the printer is ready for use.
    Then set up a connection that you need, for example the connection between the printer and computer, smartphone, or tablet.

Connecting via USB Connection

figure: USB connection

  1. Choose The driver from the table below based on your Operating System
  2. Click Download and Select Save as from the Savemenu and save it to familiar location location on thecomputer which you want to connect the printer.
  3. Execute downloaded exe file to start setup automatically,
  4. Follow the on-screen instructions to complete setup.

Canon Ij Setup PIXMA MX497 Links

Download
Category
Windows all versions 32bit
Windows all versions 64bit

Download
Category
OS X 10.9,OS X 10.8
Mac OS X 10.6

Download
Category
Linux (RPM/DEB)

Canon Ij Setup PIXMA MX497 Canon Ij Setup PIXMA MX497