Canon Ij Setup imagePROGRAF PRO-4000S

Canon Ij Setup imagePROGRAF PRO-4000S


Canon Ij Setup imagePROGRAF PRO-4000S Canon Ij Setup imagePROGRAF PRO-4000S

Canon Ij Setup imagePROGRAF PRO-4000S – Move Feed Unit and Paper Handling

The discretionary move nourish unit can be utilized as a take up genuine as we’ve found in printers previously. In any case, this move encourage unit can likewise go about as a moment move feeder with it’s own particular one of a kind paper way to the printing territory. With this unit we basically have twofold move bolster that enables clients to keep two unique rolls introduced all the while.

Even all the more astounding that the printer can rapidly switch between these rolls consequently without client mediation. The main edge of one roll is kept at the printing region while the main edge of the unused roll is held a couple of crawls in a holding zone, prepared for utilize. At the point when a roll is stacked you indicate which media it is and the printer follows along. When you need to print, simply select the media in the driver appropriately and the printer knows which move to print to. Select ‘Radiance’ as your media in the driver and it prints to the shine roll, or select ‘Matte’ as your media in the driver and it prints to the matte roll

There’s no compelling reason to indicate move 1 or 2. Since Canon printers don’t have the clumsy photograph and matte dark ink exchanging that Epsons shockingly still have, this implies you can make prints to a matte move, prints to the brilliance roll and back to matte amazingly rapidly with no client intercession (paper stacking) at all.The Canon Ij Setup imagePROGRAF PRO-4000S has a comparative cut sheet stacking process that the past Canon iPF printers had, alongside the same bended paper way. While this makes the utilization of inflexible materials inconceivable, I’ve possessed the capacity to utilize huge sheets of substantial papers without an issue.

Touch screen shading show Canon Ij Setup imagePROGRAF PRO-4000S

Gone are the times of the dinky little screen with devoted catches around it. This printer has a telephone measured, touch delicate shading screen with wonderful designs and representations. There is additionally a long thin light above it that progressions shading demonstrating the printers status. This light is white when printing ordinarily and turns red when the printer needs attentio which you can without much of a stretch see this from over a vast room.Compact

While Canon’s past 44″ printer was 74.5 wide, and Epson’s 44″ printers are 74″ wide, the Canon Ij Setup imagePROGRAF PRO-4000S is shockingly smaller with a width of only under 63 inches wide – very nearly a full foot smaller. This is expected to a limited extent to a shrewd format and to some degree to it’s new streamlined, single print head plan and littler carriage.

Single Print head

The new PF-10 print head has 1.28 inch wide spout strips for each of the 12 inks. The PF-10 is required to last longer than past print heads and in spite of being bigger, is much more reasonable (MSRP$675 – evaluated road value US$525) than two of the past heads ($1200). The risk of coming up short print heads has dependably lingered over Canon printer clients so the lower costs and expected increment in life span are welcome changes.Wifi

The present wifi systems are super quick and the huge organization Pro-x000 pritners incorporate inherent wifi arrange availability. USB and ethernet ports are likewise accessible. An additional USB port in the front enables you to print from a USB memory stick and printing from a tablet or telephone is bolstered over wifi.


Extensive configuration printers have dependably had wobbly bushels with restricted usefulness however the container on the Pro-4000 backings 7 positions including a few at paper bolster tallness. I like the positions that capacity not as a crate but rather as a slope to delicately control prints to a work table.

Shafts and center connectors

Group has dependably had clever, unintuitive 3″ center connectors for it’s axles that were hard to get on or off. The new shafts and connectors are shrewd and simple to utilize, and the locking component now works consummately.

Print Quality

The print quality has been is made strides. While some of these enhancements can be measured, huge numbers of them can’t. The chroma enhancer, thick screening and more slender shade embodiment create various visual upgrades that are hard to portray. The sheen on polished papers, appearance at an assortment of points and under various lights, appearance of profundity and immersion are altogether enhanced in ways that one needs to see with their own eyes to completely get it. A couple of focuses that I find significant:

To the stripped eye, prints with any substance now show up totally ceaseless tone without a noticeable printer spot. At the point when seen under a loupe, the screening is significantly smoother with significantly more spots that are set nearer to each other, mixing with others. I’ve long felt that the presence of an unobtrusive ‘grainy’ printer speck was a shortcoming to the Canon mark however that has been disposed of.

At the point when the shading extent and Dmax esteems are contrasted with the past printers in applications like Colorthink the outcomes are fundamentally the same as the past age printers. The range is somewhat littler in the greens yet bigger in some different regions. Outwardly be that as it may, prints of a similar picture seem to have wealthier blacks, more shadow detail, somewhat more shading immersion generally speaking. Without precedent for my profession I feel like shading extent rendering examinations don’t tell the full, target story like they used to.

Prints on non-matte papers have a more reliable, more attractive sheen on them on account of the new clear Chroma Optimizer. Less shine differential converts into better looking prints with less of that ‘inkjet’ look to them. Similarly as with the past Canon inkset, the new inks are shockingly solid and impervious to scratching, in respect to different brands.

Printer Driver and Photoshop Plug-in

The new printer driver is great and consolidates a considerable measure of cutting edge usefulness that iPF clients initially just had in the printing module. Choices like “No Space on Top and Bottom”, “Print after gathering is finished”, close end edge and cut rates controls are on the whole accessible in the new driver (take note of: the x400 printers additionally had these choices in the driver, however past printers didn’t). The driver now bolsters custom page sizes to 65 feet (780 inches) and full 16 bit printing. The driver incorporates the choice to spare a picture to the hard drive on the printer itself so extra prints can be produced using the printer without the guide of a workstation. My most loved element in the module was the print perception that outlined the move of paper and how your picture would be situated on it. The new driver’s ‘Print Preview’ work, takes into consideration a similar perception with the expansion of imagining the paper cut situating. The driver now bolsters ICC profile target printing from the Adobe Color Printing Utility on both macOS and Windows, which will be the favored technique for Canon printers pushing ahead as it is with Epson printers. Astute macOS iPF clients will take note of that the ‘extraordinary packaging’ that made such a significant number of clients apply Doyle’s XML hack is never again required with this new driver.

While macOS clients will appreciate an altogether new, composed starting from the earliest stage driver, Windows clients have two drivers to browse relating with Microsoft’s change from the GDI to XPS printing models. The Windows GDI driver is highlight finished however needs bolster for 16 printing (a GDI impediment). The more up to date current XPS driver bolsters 16 bit printing yet does not have a portion of the littler usefulness of the GDI driver (like Free Layout). Subsequently are the tradeoffs to manage while creating driver for Windows amid this transition.Fifteen years prior the driver APIs were primitive to the point that printer makers were constrained with what highlights they could actualize. At the point when Canon made the PS module, they conquered these constraints and were the first to acquaint 16 bit picture conveyance with a printer, with up-examining and honing controls, long print lengths, and loads of extra printer controls that the printer driver APIs couldn’t deal with at the time.

Group has possessed the capacity to consolidate this propelled usefulness in this new age of printer drivers and has chosen to resign the Photoshop printing module. Murdering the module was a disputable choice that clients will without a doubt gripe uproariously about, yet I bolster their choice. The new driver is fabulous and strong, and there’s incentive to a reliable interface to use with any application. There’s nothing from the old module that I’m absent in my own particular work process today with this new driver. Basically, all that we used to depend on the Photoshop Print Plug-in to do, we would now be able to do with the driver. The driver is the future, its incredible and I’ll urge my customers to grasp it.

Print Studio Pro

Ordinance’s Print Studio Pro is advanced as a substitution for the more seasoned printing module. I think this is a terrible similarity to some extent on the grounds that the old Plug-in conveyed specifically to the printer without the driver and it’s confinements. Print Studio Pro prints through the driver and truly, I battle to see where PSP could fit carefully into my customer’s work processes. PSP offers some novel shading alterations, constrained design abilities and gives Photoshop clients a method for printing different pictures at the same time. In spite of this, the interface is cumbersome and I neglect to see this being an ideal choice for the present experts. Those that need to oversee, format and print heaps of pictures at the same time have just relocated far from Photoshop and towards applications like Lightroom, Capture One, ImageNest, Qimage and different RIPs. Taking a gander at the master plan, I believe it’s imperative to locate the best application for your work process and printing from that application (and likely through the driver) bodes well.

Cutting Mechanism

Group printers have constantly used a revolving edge, and in late models, a double turning cutting edge where two restricting plates pivot at the cut point. The new Pro-x000 printers have a different carriage instrument only for the shaper which is solid and fit for printing the thickest canvas and cotton papers. This continues removing dust from the print heads, puts the slice nearer to the paper exit That is the short review about Canon Ij Setup imagePROGRAF PRO-4000S .

How to excecute Canon Ij Setup imagePROGRAF PRO-4000S ? here are some instructions:

Connecting via Wireless LAN

figure: Connection without using wireless router

  1. The screen shows MenuWireless LAN connection,Wired LAN connection, USB Connection and Do Not Connect
  2. Press/TapWireless LAN connection.
  3. To confirm the choice please Press/Tap Yes.

    Please wait for a couple second to let the setting works, when the success notice appears on the screen, theprinter isready for use.
    Then set up a connection that you need, for example the connection between theprinterand computer, smartphone, or tablet.

Connecting via Wired LAN

figure: Wired connection

  1. The screen shows MenuWireless LAN connection,Wired LAN connection, USB Connection and Do Not Connect
  2. Tap/PressWired LAN connection.
  3. To confirm the choice please Press/Tap YES.When the screen ask to connect the ethernet cable, please connect theprinterto a network device such as a modem or router with an Ethernet cable.
    figure: Connect printer to network device with Ethernet cable
  4. Tap OK to confirm.

    Please wait for a couple second to let the setting works, when the success notice appears on the screen, the printer is ready for use.
    Then set up a connection that you need, for example the connection between the printer and computer, smartphone, or tablet.

Connecting via USB Connection

figure: USB connection

  1. Choose The driver from the table below based on your Operating System
  2. Click Download and Select Save as from the Savemenu and save it to familiar location location on thecomputer which you want to connect the printer.
  3. Execute downloaded exe file to start setup automatically,
  4. Follow the on-screen instructions to complete setup.

Canon Ij Setup imagePROGRAF PRO-4000S Links

Windows all versions 32bit
Windows all versions 64bit

OS X 10.9,OS X 10.8
Mac OS X 10.6

Linux (RPM/DEB)

Canon Ij Setup imagePROGRAF PRO-4000S Canon Ij Setup imagePROGRAF PRO-4000S