Canon Ij Setup imagePROGRAF PRO-4000

Canon Ij Setup imagePROGRAF PRO-4000


Canon Ij Setup imagePROGRAF PRO-4000 Canon Ij Setup imagePROGRAF PRO-4000

Canon Ij Setup imagePROGRAF PRO-4000 – As I specified in a current post, my old extensive configuration printer has surrendered the phantom, so I’ve quite recently had another Canon imagePROGRAF PRO-4000 introduced, and today I will walk you through a portion of the key new highlights and give my assessment of this new printer.

To get directly to the point, with my old 24″ Canon Ij Setup imagePROGRAF PRO-4000 breaking after only six years, for a couple of moments, I considered moving far from Canon for my huge arrangement printing, yet then I understood that there was another line of extensive organization printers that has recently been declared, so I chose to investigate, and was extremely energized by what I saw.

At first, I was just going to supplant my 6350 with the PRO-2000, which is the successor 24″ wide move media printer, however despite the fact that this new scope of PRO printers are smaller, they are more than double the stature, which implies the PRO-2000 can’t be conveyed up to my third floor studio. It just won’t fit around the highest point of the stairs, even remained on end.

There was a choice to have it crane lifted up to the third floor and go in through the window, however this would cost $1,500, and after that obviously another $1,500 to have it brought down again on the off chance that I move, or when it unavoidably breaks again sooner or later what’s to come.

I assumed if I would spend another $3,000 I should put that cash towards an Canon Ij Setup imagePROGRAF PRO-4000, which is the 44″ wide enormous sibling of the PRO-2000, and have that introduced on my second floor rather than up in my studio. What’s more, when I say huge sibling, I truly do mean BIG, as should be obvious in this photograph of me with the printer subsequent to having it introduced (underneath).

Martin with the Canon PRO-4000 44″ Printer

Before singing the agreement, I went to the Canon S Tower here in Tokyo and made various vast prints on three kinds of Breathing Color media, and I was exceptionally content with the outcomes. Note that I did my tests on the PRO-2000, preceding I heard the cost for the crane lift, however the 2000 and 4000 are basically indistinguishable with the exception of the width of move media that can be utilized. This likewise implies this survey will be similarly as valuable in the event that you are thinking about the PRO-2000 as it will for the PRO-4000.

Anyway, my PRO-4000 touched base on August 9, and took four individuals to convey it up to the second floor, and put it onto its stand. I have since spent the most recent five days setting it up, making my ICC profiles, and becoming acquainted with this wonderful new bigger configuration printer from Canon.

What’s New?

Before we take a gander at a few prints, we should speak a little about what’s new with the PRO-4000. Indeed, Canon have discharged another arrangement of inks for this lineup called LUCIA PRO ink, which really diminishes the quantity of hues from 12 to 11 color inks, however they included another Chroma Optimizer.

Group PRO-4000 6 of the 12 Inks

From the Canon site, I see that “LUCIA PRO ink definition incorporates small scale typified colorants that empower smooth inclinations, an extended shading array, and more profound shading articulation.” In numerous ways, I concur with this announcement, yet I’m really not persuaded that the shading range is extended. Actually, for some particular circumstances utilizing matte media I’d the array has been gotten a bit, yet I’ll speak more about this later…

The Chroma Optimizer is utilized when imprinting on reflexive and semi-polished media, and goes about as a reasonable coat, enhancing shading and advances the dull territories of gleam prints. The new inks and Chroma Optimizer are additionally said to enhance scratch protection and lessen graininess. We’ll investigate some genuine prints in a matter of seconds.

I was additionally upbeat to find that the dark line that was constantly left on the correct underside of the prints is never again an issue. That is something that bothered the damnation out of my about my iPF6350 and I realize this was not settled the 6450, so it’s pleasant this is at long last settled.

Just a single Print Head

While my old printer had two print heads, costing around $300 each, the new PRO printer lineup utilize only one, 1.28″ wide print head with 18,432 spouts and hostile to stopping up innovation. This new print head costs around $500, so there’s a $100 sparing when that should be supplanted, expecting that you’d change the two heads on the old models obviously. Having quite recently the one head additionally empowered Canon to make the printer smaller in width, which is a pleasant space saver.

Standard PF-10 Print Head for the PRO-4000

Having quite recently the one print head likewise empowered Canon to accelerate the printing extensively. A 18 x 24 inch print on my old printer used to take around 9 minutes, yet with the new PRO-4000 a similar size print takes rough 3 minutes 40 seconds.

New Media Loading Mechanism

The media stacking component has additionally been completely changed. You now stack the move from the front of the printer by opening the Top Cover and the Output Guide as should be obvious in this photograph (underneath). In the wake of dropping the media on its holder into put, you turn the move holder which manages the media up into the printer, until the point when you hear a beep, to tell you that the printer would now be able to bolster the media.

Ace 4000 with Top Cover and Output Guide Open

At that point, you close the two covers and press a catch the LCD show to advise the printer to simply ahead and sustain the paper. Not exclusively does this mean we don’t need to touch the paper to such an extent, we likewise now have the advantage of the paper being topsy turvy for more often than not before it’s imprinted on.

This is an advantage since it implies that clean is less inclined to settle on the print side of the media as you print, and tidy that is as of now on the media, will probably tumble off, before it’s imprinted on. In the event that you print on clean, the tidy for the most part tumbles off as the print dries, leaving a white spec, and for the quality cognizant printer that implies that the print has be made again starting with no outside help.

Media Information Update

Another extremely pleasant touch that I’m almost certain I couldn’t do with my old iPF6350, is that you can refresh the Media Information in the printer drivers on different PCs. Previously, in the event that I included a custom media write, similar to a move of Breathing Color paper, to the printer, to get that same media in the drivers on an alternate PC, I needed to utilize the Media Configuration Tool and include the media again.So How Good Are the Prints?

Fox on Breathing Color Pura Bagasse Textured Matte Media

How about we investigate now at a couple of prints that I’ve officially done as tests. To begin with take note of that in spite of the fact that I have gotten somewhere in the range of 44 inch moves from my companions at Breathing Color, the greater part of my tests so far have been finished utilizing 24 inch move media. I can hardly wait to print something out that is colossal, yet not until the point that I have an end reason for the print.

Anyway, after I made a custom ICC profile for every one of my media composes, I start doing some test prints. As matte media is typically less lenient than shine, I began with the matte stock that I have.

My most loved matte media is Breathing Color’s Pura Bagasse, which comes in both a Smooth and Textured form. I printed this photo of a Northern Red Fox on the Pura Bagasse Textured, and was exceptionally content with the profundity of the shading and lucidity of the picture (right). This is a photo of the print obviously, not the first picture.

I printed this from Capture One Pro 9, so there is no reason for contrasting this with prior prints, yet there is a profundity that was not so much there on my prior prints, particularly around the eyes, where the lucidity truly becomes possibly the most important factor.

Here’s a nearby of simply the eye, with the goal that you can ideally in any event somewhat acknowledge what I’m seeing (beneath). Note this was a 7D Mark II photo printed at 18 x 24 inches, so the determination was around 250 ppi, which is sufficient for a print of this size, however not also characterized as a higher determination picture.

Fox Eye Closeup – Pura Bagasse Textured

I was content with this first print, and I completed a couple of others that looked awesome as well, however the following print simply didn’t generally work under for the most part an indistinguishable conditions from I’d printed previously. When I discharged my survey of Breathing Color’s Pura Bagasse media in scene 484, I demonstrated how wide a shading array the media had, by printing a photograph of a field of poppies, that was quite out of range.

Presently, given that there ought to have been no real way to print the hues that were out of array in any case, this may appear somewhat unforgiving on the new printer, yet having made an ICC profile in the very same route for every printer, the PRO-4000 essentially doesn’t not deal with this photo and additionally my old iPF6350 did.

Here’s a photo (beneath) of a similar picture imprinted on a similar paper, with the iPF6350 print on the left, and my PRO-4000 print on the right. As should be obvious, the edges of the blotches of out of center yellow have an awful relatively septic feel to it. The main part of the yellow is what is out of range, and the printer has not taken care of the change amongst that and the in array hues well.

iPF6350 (left) and PRO-4000 (right) Comparison

Like I say, the base photograph is out of array, yet this was the same for the two printers, so this demonstrates to me that the PRO-4000 doesn’t work out quite as well as the iPF6350 in this circumstance. In every other regard, I believe it’s kickin’ yet here, I was somewhat baffled. That is the short review about Canon Ij Setup imagePROGRAF PRO-4000 .

How to excecute Canon Ij Setup imagePROGRAF PRO-4000 ? here are some instructions:

Connecting via Wireless LAN

figure: Connection without using wireless router

  1. The screen shows MenuWireless LAN connection,Wired LAN connection, USB Connection and Do Not Connect
  2. Press/TapWireless LAN connection.
  3. To confirm the choice please Press/Tap Yes.

    Please wait for a couple second to let the setting works, when the success notice appears on the screen, theprinter isready for use.
    Then set up a connection that you need, for example the connection between theprinterand computer, smartphone, or tablet.

Connecting via Wired LAN

figure: Wired connection

  1. The screen shows MenuWireless LAN connection,Wired LAN connection, USB Connection and Do Not Connect
  2. Tap/PressWired LAN connection.
  3. To confirm the choice please Press/Tap YES.When the screen ask to connect the ethernet cable, please connect theprinterto a network device such as a modem or router with an Ethernet cable.
    figure: Connect printer to network device with Ethernet cable
  4. Tap OK to confirm.

    Please wait for a couple second to let the setting works, when the success notice appears on the screen, the printer is ready for use.
    Then set up a connection that you need, for example the connection between the printer and computer, smartphone, or tablet.

Connecting via USB Connection

figure: USB connection

  1. Choose The driver from the table below based on your Operating System
  2. Click Download and Select Save as from the Savemenu and save it to familiar location location on thecomputer which you want to connect the printer.
  3. Execute downloaded exe file to start setup automatically,
  4. Follow the on-screen instructions to complete setup.

Canon Ij Setup imagePROGRAF PRO-4000 Links

Windows all versions 32bit
Windows all versions 64bit

OS X 10.9,OS X 10.8
Mac OS X 10.6

Linux (RPM/DEB)

Canon Ij Setup imagePROGRAF PRO-4000 Canon Ij Setup imagePROGRAF PRO-4000