Canon Ij Setup imagePROGRAF PRO-2000

Canon Ij Setup imagePROGRAF PRO-2000

Canon Ij Setup imagePROGRAF PRO-2000 – The PRO-2000 printer is a 24″ width extensive organization printer. It’s fundamentally the same as the 44″ PRO-4000 and 60″ PRO-6000.

Keith Cooper has been dragging it through hellfire for this longish survey which focuses on utilizing the printer for excellent photographic printing.

For those in a rush: Conclusions Canon Ij Setup imagePROGRAF PRO-2000

For the majority of this survey, the PRO-4000 and 6000 can be thought of as basically more extensive renditions of the 2000.Canon PRO-2000

The PRO-2000 is a 24″ width vast arrangement printer. Though the past iPF6100, iPF6300 and iPF 6400 demonstrated a consistent advancement in outline, the PRO arrangement of printers looks particularly changed (joins are to my audits of past models).

Canon Ij Setup imagePROGRAF PRO-2000 The printer is greater and heavier than past models and has a significantly higher ink limit – those two boxes at the back hold 12 ink trucks in sizes up to 700ml. The inks have been reformulated offering further blacks (on photograph media) and have swapped the green ink of the past models for an unmistakable gleam coat or ‘Shading Optimiser’ (CO) ‘ink’.

One misfortune from the prior models is a best stacking sheet media space. Sheet media now needs stacking physically at the front, similarly that the 44″ and 60″ variants of the past models did, (for example, the 44″ iPF8300 I have here). Canon Ij Setup imagePROGRAF PRO-2000

All printers now can acknowledge a second move unit, which can be exchanged between move encourage or move take-up. This is standard on the PRO-6000, and discretionary for the PRO-2000 and PRO-4000. You can see it being utilized as a part of take-up mode above.

I’ve as of late investigated the 17″ PRO-1000 printer which can be thought of as a littler ‘sheet just’ variant of the PRO-2000. All my print quality perceptions in that (long) survey are pertinent to the PRO-2000.

The fundamental highlights from Canon: [Full Specs at foot of article]

Utilizing LUCIA PRO 12 inks, enhanced blacks and shading

Another 1.28″ wide print head empowers quicker printing

Discretionary double move unit underpins persistent paper sustain or programmed take-up of the printed yield.

Ergonomic outline with a level best surface for print checking and 3.5″ shading LCD touch screen task board.

Coordinate printing for PDF and JPEG record groups from USB memory stick.

Wi-Fi and wired network

Ensured shading consistency amongst employments and distinctive creation destinations.

High-limit “hot swap” ink tanks for continuous printing.

The Print Studio Pro module gives you a chance to print from programming, for example, Lightroom, Photoshop and Canon’s Digital Photo Professional

I’ll cover these highlights and more in the survey. All testing here is with Apple Macs (OSX 10.10 and 10.11), however PC utilize is practically comparable.

What do you get with the PRO-2000?

The printer is a heavy piece of unit and is probably going to be conveyed gathered like underneath, or in parts on a palette.Wireless functions as both piece of a current system, or you can set up a specially appointed system for associating telephones/tablets.

Hello Speed USB 2.0

1000Base-T Ethernet

WiFi (b/g/n)

Insights about system setup and arrangement are in the get together and start-up points of interest.

The printer is effectively controlled by means of the shading touch screen, which gives you a chance to look through menu screens with a basic swipe of the screen.

The orange light over the screen is a notice light – for this situation this is on the grounds that a portion of the inks are low.

Great, yet for the reality the inks appeared as low directly after starting setup (with the provided 160ml cartridges) and kept on doing as such directly through my opportunity testing the printer. I’ll return to ink use later, yet I’d simply take note of that a notice light that is dependably on rapidly loses its capacity to get your attention.I should take note of that the Canon approach is to have loads of extra spouts in the print take which are mapped off on the off chance that they fall flat. This implies you’re probably not going to perceive any fizzled spout checks until the point that the print head needs supplanting. The new printers have one single print set out unit toward all hues, rather than the two in past huge printers.

The printer is up ’til now too new an item to give any important expectations about print head life, other than to advise you that – all-substantial arrangement printers (any make) detest long stretches of neglect and that a printer utilized each couple of days is very liable to be more solid than one that is regularly left unused for quite a long time.

Alignment and bolster change

The print head get together has sensors worked in to it that let the printer perform adjustment checks. This guarantees your printer is working at a known standard of execution. It isn’t the same as ICC paper profiling and the printer can’t do this.

I’ve specified alignment in detail in the setup article, however do as such again here since it’s an essential advance in guaranteeing ideal printer execution. It needs doing after beginning setup and surely in the event that you supplant the print head. I’d likewise recommend doing it after you’ve had the printer for a couple of months and afterward in any event yearly. A few clients in the pre-press and sealing business should do things like this all the more frequently, yet I’m coordinating my remarks generally at picture takers simply needing to make incredible looking huge prints.Paper Loading and Media dealing with

The printer is essentially gone for move paper clients. That doesn’t imply that it doesn’t function admirably with sheet paper, only that contrasted with the 17″ PRO-1000 it feels somewhat more awkward to utilize. On the other hand, you can’t print a 30″ x 15″ all encompassing sheet on the PRO-1000.

You’ll see a material print catcher unit on the front of the printer. This can be reconfigured in various routes for various utilization situations. The printer I’m taking a gander at here is a Canon test unit, and the outline is somewhat extraordinary to the transportation printers. I’ve more data about arranging the print catcher in the PRO-2000 printer setup article.

The printing territory is appeared underneath with sustain rollers and just before them, the openings and spaces of the paper vacuum framework which holds paper level and gathers any overspray from borderless printing. In the event that you do much borderless printing I’d propose giving this zone a wipe with a marginally sodden fabric from time to time, to lessen ink development and the danger of smears on prints and fingers.You can likewise observe the blue paper roller shaper get together at the right. This is anything but difficult to get to for sharp edge substitution, and closer to the front of the printer. Each sort of move media I tried (counting canvas) was neatly cut.

I tried a few cut sheet papers amid the time the printer was here. The cases underneath are my standard arrangement of test pictures for another paper, for this situation Pinnacle Velvet, a 275gsm finished workmanship paper from a neighborhood (Leicester, UK) provider.

You can see a profile focus at the back, a paper propel test picture (dim piece), a check for the B&W print mode, and a shading test picture made with the profile made for the paper.

I’ll take a gander at custom media settings and profiling in more detail later.Roll media

Amid testing I attempted media extending from 90gsm (translucent) following paper through to half millimeter thick craftsmanship papers, and two unique thicknesses of canvas.

I’ve a few moves of vagrant papers in our print room that I was sent to test previously and have lost the first box.

Presently, I’ve really a truly smart thought what the vast majority of them are, however they may not be freely accessible or now under an alternate name, so I discover them great to test my ‘new paper’ forms.

Here’s a light craftsmanship paper (matt OBA free) on a 3″ center.

The screen gives clear directions for stacking in case you’re unsureAuto exchanging

One of the highlights of the printer is that it can swap move papers without requiring administrator consideration. Exactly how valuable this is relies upon the sorts of printing you do.

In case you’re printing miles of prints on photograph papers or light-medium canvas then this could be an awesome help. That and if maybe you don’t put stock in the capacities of your administrators past not strolling into the printers… ;- )

I attempted it with artistic work media (I have a softly finished rendition of the overwhelming workmanship paper too) and it truly didn’t work exceptionally well, with the rewinding making the paper withdraw from the center and ‘buoy’.

No issues with a light photograph paper like the Canon 200gsm, yet I don’t for the most part offer prints on light papers.

Overwhelming thick papers truly need to unroll – the paper wrap on this one in reality left a slight stamp on the paper, losing a couple of creeps at the startCustom Media composes

When utilizing a Canon paper, you can simply utilize the standard media setting for that paper. Without a doubt, you may pick a specific setting for an outsider paper, to coordinate the one utilized when the paper provider made an ICC profile.

However a capable programming bundle, the Media Configuration Tool (MCT), is accommodated altering and making custom media data.

Why go to the inconvenience of utilizing it?

Suppose you have a photograph paper that accompanies an ICC profile made utilizing the Canon Satin 240gsm media setting.

By making a custom media compose in light of the Canon Satin 240gsm base media write you can determine it on the front board when stacking the paper.

Alright, that decreases the potential for mistakes, what else do you get?

The custom media can have a sustain modification improved for that paper (decreasing the odds of banding and different impacts that may encroach on print quality).

On the off chance that you utilize the Accounting Tool (of which more in a bit) for monitoring paper and ink utilize, at that point the custom media can have particular bookkeeping data related with it, for all the distinctive sizes you utilize (e.g. costs for A3+ and A2 sheets and 15 meter rolls).

On the off chance that you truly need to augment quality for a specific media compose you can likewise indicate ink limits for your custom media, and set up an adjustment target. This is more probable on the off chance that you make your own custom ICC profiles. You can trade settings records, yet in the event that you are making profiles and media design documents for others, at that point you are making assumpti That is the short review about Canon Ij Setup imagePROGRAF PRO-2000 .

How to excecute Canon Ij Setup imagePROGRAF PRO-2000 ? here are some instructions:

Connecting via Wireless LAN

figure: Connection without using wireless router

  1. The screen shows MenuWireless LAN connection,Wired LAN connection, USB Connection and Do Not Connect
  2. Press/TapWireless LAN connection.
  3. To confirm the choice please Press/Tap Yes.

    Please wait for a couple second to let the setting works, when the success notice appears on the screen, theprinter isready for use.
    Then set up a connection that you need, for example the connection between theprinterand computer, smartphone, or tablet.

Connecting via Wired LAN

figure: Wired connection

  1. The screen shows MenuWireless LAN connection,Wired LAN connection, USB Connection and Do Not Connect
  2. Tap/PressWired LAN connection.
  3. To confirm the choice please Press/Tap YES.When the screen ask to connect the ethernet cable, please connect theprinterto a network device such as a modem or router with an Ethernet cable.
    figure: Connect printer to network device with Ethernet cable
  4. Tap OK to confirm.

    Please wait for a couple second to let the setting works, when the success notice appears on the screen, the printer is ready for use.
    Then set up a connection that you need, for example the connection between the printer and computer, smartphone, or tablet.

Connecting via USB Connection

figure: USB connection

  1. Choose The driver from the table below based on your Operating System
  2. Click Download and Select Save as from the Savemenu and save it to familiar location location on thecomputer which you want to connect the printer.
  3. Execute downloaded exe file to start setup automatically,
  4. Follow the on-screen instructions to complete setup.

Canon Ij Setup imagePROGRAF PRO-2000 Links

Download
Category
Windows all versions 32bit
Windows all versions 64bit

Download
Category
OS X 10.9,OS X 10.8
Mac OS X 10.6

Download
Category
Linux (RPM/DEB)

Canon Ij Setup imagePROGRAF PRO-2000 Canon Ij Setup imagePROGRAF PRO-2000